2 channel constant voltage amplifier delivering over 400 watts per channel in just 1U space.
The CVA-7800 Contractor Series Power Amplifier delivers more than 400 watts per channel in stereo mode. Stewart Audio’s unique power shift correction feature allows the amplifier to produce crystal clear uncolored sound. This remarkable performance comes in a package weighing only 11 pounds while occupying just one standard rack space. Thermal concerns are minimized in the CVA-7800 by innovative circuitry and extraordinary efficiency, making installation simpler than ever before. The design of the CVA-7800 is exceedingly conservative with regard to current capabilities. This ensures that the amplifier’s output devices remain within their safe operating area, even under extreme conditions. As a result, the CVA-7800 runs low impedance loads safely while retaining the high impact dynamics for which they were designed.
|
LITERATURE |
|
|---|---|
Product Datasheet |
|
User Manual |
|
VISIO STENCILS |
|
|---|---|
Faceplate Options Stencil Library – Visio Editable |
VSD |
| 70.7 Output Power | 400W x 2 |
| Frequency Response (+/- 0.3dB, 1W) | 35Hz – 20kHz |
| Full Power Bandwidth | 35Hz – 20kHz |
| Signal to Noise Ratio | >100dB |
| THD+N | <.1% |
| Damping Factor | >200 |
| Slew Rate | 30V/microsecond |
| Input Sensitivity | 1V (0 dBV) |
| Standard Voltage Gain | 40x (32dB) |
| Input Impedance | 20k Ohms |
| Idle Current Draw, 1/8 Power Draw | 0.36,1.9 Amps |
| Class | H |
| Input Connectors | XLR and Barrier |
| Output Connectors | 5-way Binding Post |
| Power Supply | High-speed Switching |
| Remote Turn On | 5VDC |
| Cooling | Convection-Cooled (No fans) |
| Controls | Power, Gain (Screwdriver adjust) |
| LED Indicators | Signal Present, Power & Clip |
| Construction | Steel & Aluminum |
| Dimensions (H,W,D) | 1.75″H x 19″W x 15.3″D |
| Weight | 11lbs |
| Warrant | 3 year |